Your current location:Home >>Product Center >>Inert porcelain ball

Inert porcelain ball

Hits:2323  Time:2019-12-03    

产品介绍.jpg

The porcelain balls produced by our factory are made of high quality raw materials, with exquisite spray drying technology, dry automatic isostatic pressing process and sintering by high-temperature gas tunnel kiln. The production specifications are respectively 30mm 40mm 50mm 60mm. This series of products are widely used in ceramic enterprises to grind the blank. Compared with natural stone balls and ordinary porcelain balls, its wear resistance is increased by 20-40 times, grinding efficiency is increased by 40-60%, and the efficiency of the mill is increased by 30-40%. The comprehensive cost is 40-60% of that of natural stone balls. The choice of aluminum porcelain balls produced by our factory as grinding medium can significantly reduce the grinding time of the balls and achieve the energy efficiency of increasing production and saving electricity.

The porcelain balls produced by our factory are made of high quality raw materials, with exquisite spray drying technology, dry automatic isostatic pressing process and sintering by high-temperature gas tunnel kiln. The production specifications are respectively 30mm 40mm 50mm 60mm. This series of products are widely used in ceramic enterprises to grind the blank. Compared with natural stone ball and ordinary porcelain ball, its wear resistance is increased by 20-40 times, grinding efficiency is increased by 40-60%, the efficiency of the mill is increased by 30-40%, and the comprehensive cost is 40-60% of that of natural stone ball.

功能特点.jpg

● with high hardness, bulk density, corrosion resistance, high temperature performance, mechanical strength, material pollution-free, good wear resistance and other advantages.

And in the isostatic pressure aluminum grinding ball than natural pebbles, can improve the grinding efficiency. Under the condition of the same speed, proportion of ball and water, the grinding time can be shortened, the output of single machine can be increased, and the grinding production cost can be reduced. It is widely used in ceramic, glass, enamel, pigment, petroleum, fine chemical industry, building materials, metallurgy, machinery, electronics and many other fields.

● the hardness, strength and wear resistance of aluminum grinding porcelain ball are similar to that of high alumina porcelain ball, its density is lower than the current high alumina porcelain ball, the grinding efficiency is relatively low, but because its raw material cost is only about a quarter of the high alumina porcelain ball, sintering temperature is low, the production cost is not high


理化性能.jpg

ItemValue

Bibulous

rate (%)

<0.5
density (g/cm3)1.35-1.4

propo

rtion (g/cm3)

2.3-2.4

Void 

fraction (%)

40
operating (℃)1100

Mohs 

hardness (scale)

>6.5

Acid 

degree (%)

>99.6

Alkali

degree (%)

>85

包装方案.jpg

氧化铝瓷球包装.jpg


Pre page: Common alumina ceramic ball

Next page:无