Your current location:Home >>Product Center >>Q parker
Hits:3829 Time:2020-02-19
Q park is suitable for many different drinking water treatment processes, such as biological treatment, physical filtration, pretreatment for desalination of seawater, and drinking water treatment Q.
Puck has a large porosity and surface area that is ideal for the biological treatment of potable water. Biofilm is a good treatment process for raw water containing ammonia, manganese, iron, etc. Q parker can be used in different ways during the traditional filtering process. The media dual filter Q parker can be combined with sand. Tests have shown that Q parker operates as well or better than traditional media in these types of filters. Q parker can be used not only for traditional drinking water treatment, but also for brine treatment. An important part of the desalination plant is the pretreatment process. Q parker is a good filter medium for pretreatment and filtration of seawater desalination plant.
Plastic bulk packing is made of polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene (PVDF), polytetrafluoroethylene (PTFE) and so on. It has the characteristics of high void fraction, low pressure drop, low mass transfer unit height, high flooding point, full gas-liquid contact, small specific gravity, and high heat and mass transfer efficiency. These plastic bulk fillers operate at temperatures ranging from 60 to 280 degrees Celsius.
name | Intalox saddles | ||||
material | PP,PE,PVC,CPVC,PVDF ,etc | ||||
service life | >3 years | ||||
size | Drip several | voidage% | number | packing factor | |
Packing | |||||
82.5*95 | 388 | 96.3 | 1165 | 33.7 | 23 |
performance | High voidage, low pressure, low height of mass transfer unit, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency | ||||
advantages | 1. The special structure makes it have large circulation, low pressure and good mechanical strength. | ||||
2. Strong corrosion resistance, large void ratio, energy saving and environmental protection, low cost, light specific gravity easy loading and unloading. | |||||
Application field | The use temperature of plastic bulk packing is 150 degrees Celsius, widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries of the packed tower. | ||||
Properties | PE | PP | RPP | PVC | CPVC | PVDF |
density | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.8 |
Operating | 90 | >100 | >120 | >60 | >90 | >150 |
resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
strength | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 |
Pre page: 无
Next page:无